He dropped to his knees, his cock spasming and hosing out alarming amounts of clear liquid to the floor. Mark was the varsity quarterback; good-looking and athletic – surely he had been on the receiving end of lots of blow jobs? His thrashing penis finally came to a standstill. Still gasping a bit, Mark looked at me curiously. I shook my head. He looked like he was searching for something. Finally, he just shrugged his shoulders. I looked at him in bafflement. I have to check something out.
Trying to decide: 2 8″ subs vs 1 10″ sub
The Fat Channel makes dynamics, routing, and panning for every input and output on the StudioLive available at the touch of a Select button. The 24 multipurpose knobs and meters located in the Fat Channel control nearly every adjustment you will need to make on your StudioLive. In addition, two meters—part of a set of seven meters located in the top right section of the mixer—are dedicated to displaying information about the currently selected channel.
Dynamics and Processing The main function of the Fat Channel is to provide dynamics processing and filtering for every input and output on your StudioLive. The rotary encoders work in conjunction with the meters directly above them to adjust the dynamics processing and EQ. Filter which the Gate will open.
Subwoofer Wiring Diagrams One of the most common questions in the car audio field is usually “How do I wire up my subwoofers to my amplifier?” This is not easy to explain because there are so many options and variables to consider when making the purchase and wiring up your sound system.
Non-stop action, and a cut above some of the others. Lots of unsavory groups of maniacs, assault, Neo Nazis, and sexy Sabrina Siani add to the fun. See what you need to do when the bombs drop! Super Neat helpful hints that may just save your life! Pretty funny stuff, lots of filmed demonstrations. It’s a wonderful world.
How to hook up sub to amp?
Or do i need that tacotunes equalizer thing? In my head its like I also thought of I never use my Aux cable.
Danny, You wire two DVC 4-ohm subs to an amp that can handle a 1-ohm load like this, If you want to utilize the amp’s dual-terminal set-up, you can disconnect the positive and negative leads of Sub 2 (in the diagram) from Sub 1 and connect them to the positive and negative terminals of the amp.
I’ve had friends run Kove 12″s, 4 doors and 2 tweeters off a 5 channel amp before. I doubt it got the sub to it’s RMS rating, but it sounded pretty good and got the job done, I just wouldn’t recommend it like that. I want to amp my tweeters and 6X9’s and my sub, different amps for the subs and speakers I don’t understand how you do it because the speakers have to be hooked up to the head unit right??
The power lead connects from the amp positive terminal to your battery – you will have to route the leads under your carpet. The earth goes from your amp to a suitable earth i. The remote wire will run from your amp should be labelled remote on amp connection to the remote on the back of your headunit – this is almost certainly a blue wire and shouldnt be connected to anything else the remote tells the amp when to switch off.
However, your passengers won’t like it, but who cares about them?
Multi-Amplifier Audio Systems
So what will we need to do this? But I doubt any of you guys will be using an amp that big. Walmart sells amplifier kits as do some other stores.
Apr 13, · Re: How to hook up 4 ohm subs, with 2 ohm amp. If you wire the amp in stereo, make sure the signal for each channel is the same. If you have each voice coil playing 2 different things, it could create alot of heat and possibly burn up your sub.
But what the manufacturer is not showing you is the bandwidth vs. Quality of bass and how well it integrates into a system is paramount. If I have to sacrifice a bit of extension and SPL to achieve this, so be it. The Set-Up I left my EP towards the left front corner behind my couch as it has been for the past 3 years. I placed one EP on top of it and the other EP diagonally located towards the back right of the room. Luckily the distance between both EP s was relatively equal to the primary listening area making it much easier to integrate them and not have to worry about bass cancellations due to mismanaged time alignment between the two subs.
I checked the phase and found they integrated best with both subs set to 0 degrees default. I always recommend using symmetry when placing your subwoofers relative to the primary listening area.
Multi-Amplifier Audio Systems
Originally Posted by Trogdor Thanks dd3mon. Okay, how will imaging be effected by a sub in the corner? Has anyone done this with with 2 sub’s on placed in both front corners?
Jan 06, · the impedednce doesnt come from the amp. it depends on how you wire your subs. your subs will be either dual 2 ohm, dual 4 ohm or dual 6 ohm most likely. those diagrams show 2 different ways to wire them up and what your final impedence will be when wired that way, depending on what ohm load your subs carry. if you want your subs to see 2 ohms.
Whether it’s an installation that might not have gone as planned, or a random problem that comes out of nowhere. Here is a list of your common car stereo problems, symptoms and solutions to help get your stereo up and running! Many Jeeps and Chevrolet systems have a data signal wire that carries a very low voltage signal that tells the OEM Head Unit when to turn on, however; it is not compatible with aftermarket units. If you have a voltage meter or a test light, test the ground black , constant 12v yellow , and accessory 12v red wires to make see if you have the correct voltage in the correct wires, as well as a good ground.
Constant will always be 12v, whether or not your car is on. Make sure to use your ground, as well as another ground like the frame or body of the car while testing your constant and accessory to test that you have a good ground. If you find that one of your power wires or ground wires are not correct, check your vehicle wire diagram and make sure you have the correct corresponding power and ground wires.
After finding the location of the fuse, pull it and make sure that the leads are not corroded and that the fuse has not been broken or popped. Most aftermarket amplifiers have a protection from low and high voltage. Vice versa, if your battery is low and the amplifier is not receiving a constant 12v, it will enter protection mode. Amplifiers will also enter protection mode if there is a short somewhere.
If you have a signal RCA wire that is shorting out, this could be your problem so check to see if your RCAs are in-tact and not shorted. Also, if one of the output channels are shorted out, or you have a blown speaker, many aftermarket amplifiers will enter protection mode. Disconnect all output channels and see if it will return to normal operation.
Ford F150 Forum
Additionally, subwoofers may have a low-pass filter which filters out any high frequencies so that they the subwoofer doesn’t try to play them. Depending on the subwoofer, this low-pass filter may be defeatable or may only work on the speaker level inputs. It just depends on the model, so read the subwoofer’s manual.
Mar 14, · I wanted to make a video to try and show you how to hook up your system (subs and amp). I tried to show you and explain in the easiest way possible so beginners can understand.
Speaker Connections for proper impedance match A note about amplifiers: You should always use the recommended load for your amplifier. However, if you must use a load other than the recommended load, here is a short guide. Most solid-state amplifiers would rather look at an open circuit no speaker at all than a load. Therefore, you can usually use a load that is higher than the recommended load. Do not use a lower impedance load, as this could cause serious damage to your SS amp.
On the other hand, most tube amplifiers need a load to avoid transformer or tube socket damage.